Zclever Security Camera Manual ((full)) [ Quick 2026 ]

Launch your camera app and tap the "+" (Add Camera) icon.

| Icon | Function | Description | | :--- | :--- | :--- | | | Live View | Tap to see real-time video. | | Microphone | Two-way Audio | Hold to speak through the camera. | | Record | Manual Record | Saves clip to your phone’s gallery. | | Snapshot | Photo | Takes a picture of current view. | | Speaker | Mute | Disables audio from live view. | | HD/SD | Quality | Switch between high/standard definition. | | PTZ (if applicable) | Pan/Tilt | Arrows to move the camera left/right/up/down. |

Power the cameras using the supplied 12V power adapter (split cable). Monitor: Connect a monitor to the DVR using HDMI or VGA.

If a hard drive is installed (up to 4TB SATA supported), you must format it within the menu to start recording. C. Recording Modes Select your preferred recording method: Manual: Continuous recording. Schedule: Records during specific times. zclever security camera manual

The app is your command center for all Zclever camera functions. Here's what you can do:

ZClever cameras support ONVIF protocols. You can link your camera to an external Network Video Recorder (NVR) or configure FTP uploads to back up video clips directly to a private server. 5. Comprehensive Troubleshooting Guide

If the LED is not flashing red/blue, hold the reset button for 5 seconds. Launch your camera app and tap the "+" (Add Camera) icon

To view your cameras remotely, you need to connect the system to the internet.

Draw specific boxes on the screen to monitor high-priority areas like doorways while ignoring busy sidewalks.

A: Yes and no.

Even quality cameras glitch. Here is the official troubleshooting guide.

Avoid pointing the lens directly at the sun, bright streetlights, or reflective windows, which can cause lens flare and disrupt night vision. 2. Connecting the Cables

Run the other end of the BNC cable to the DVR and screw it into a Video Input port. | | Record | Manual Record | Saves

Look for a small pinhole reset button on the camera or DVR unit. Hold Reset:

Plug the camera into a nearby power outlet using the provided power adapter. Ensure the camera remains within strong range of your Wi-Fi router.