Ms-7613 Ver 1.1 Motherboard Manual Better Page

Ensure you use DDR3 non-ECC DIMMs . Filling all four slots with 4GB sticks brings the system to its 16GB maximum capacity.

) is a micro-ATX motherboard produced by MSI specifically for HP and Compaq desktop computers, such as the HP Pavilion p6000 series. It is built around the and utilizes the LGA1156 socket , making it a staple for older Lynnfield or Clarkdale Intel processors.

If you are refurbishing an older HP or Compaq desktop, you’ve likely encountered the motherboard. Originally manufactured by MSI for HP (where it is codenamed Iona-GL8E ), this board was a staple in the late 2000s and early 2010s.

Generally reserved for internal OEM Wi-Fi / Bluetooth networking cards. 🔍 Troubleshooting Common Board Issues

The motherboard, often referred by its HP OEM name Go to product viewer dialog for this item. ms-7613 ver 1.1 motherboard manual

Manual answer (implied): No official drivers for G41 IGP beyond Vista. But community solutions exist: use the “Snappy Driver Installer” for G41 chipset drivers. A discrete GPU is recommended.

Supports 1 GB, 2 GB, and 4 GB DIMMs. It does not support 8 GB individual memory modules.

This treatise aims to be a practical companion to the official MS-7613 ver 1.1 documentation: helping readers identify components, perform safe installation and BIOS configuration, and systematically troubleshoot common problems. For exact pinouts, jumper labels, and BIOS menu names unique to a manufacturer’s MS-7613 ver 1.1 board, consult the original printed manual or manufacturer support resources while using the safety-first procedures described here.

4x DDR3 DIMM slots (Supports up to 16GB total; 64-bit OS required). Chipset: Intel H57 Express. Expansion: 1x PCI Express x16 (for graphics). 3x PCI Express x1. 1x PCI Express x1 mini-card slot. Storage: 4x SATA 2.0 connectors (3.0 Gb/s). Common "Pain Points" Ensure you use DDR3 non-ECC DIMMs

The PCIe x16 slot accepts modern GPUs, but power supply limitations of the original case must be considered.

Connect the Power LED wire. Pin 2 is Positive (+), Pin 4 is Negative (-).

The MS-7613 Ver 1.1 (Iona-GL8E) is a Legacy BIOS Micro-ATX motherboard designed for HP OEM systems, featuring the Intel H57 chipset and LGA 1156 socket for first-generation Core processors. Supporting up to 16GB of DDR3 RAM and featuring PCIe expansion, the board is suited for basic upgrades, though its legacy BIOS limits compatibility with modern UEFI graphics cards and proprietary front panel headers. Access the official documentation for this board at The Retro Web . Motherboard Specifications, MS-7613 (Iona-GL8E)

The header consists of a 9-pin block. Follow this diagram layout: It is built around the and utilizes the

: PC3-10600 (DDR3-1333) and PC3-8500 (DDR3-1066). Expansion Slots : One PCI Express x16 slot for a dedicated graphics card. Three PCI Express x1 slots for networking or sound cards. One PCI Express x1 mini-card socket, often used for WLAN. Port Layout and Internal Connectors

Driver hunting for this board requires precision. Always prioritize sources you trust. Here's a table of the most critical components and where to look:

Line-in (light blue), Line-out (lime green), Microphone (pink), Center/Subwoofer (orange), Rear speaker (black), Side speaker (grey). 7. Troubleshooting: Clearing CMOS & Password Reset

The official manual is no longer hosted on MSI’s global front page due to the board’s age, but it is still available through legacy support channels and third-party archives.