If you reset the counter multiple times without addressing the physical pads, the waste ink will eventually overflow. This can ruin your desk, damage the internal circuit boards, or short-circuit the printhead. What to do after the software reset:
Several software options are available to reset your Epson M200, each with its own trade-offs in terms of cost, convenience, and safety.
Buy a cheap set of replacement felt pads online.
Disable your antivirus software temporarily, as these third-party tools are frequently flagged as false positives.
: Check the current status. A reset is necessary if any counter shows Initialize Reset : Select the "Waste Ink Pad Counter" and click Initialize resetter epson m200
Delete all pending print jobs from your Windows print spooler.
Epson built an internal counter into the printer's motherboard. This counter estimates how full the pads are based on your usage. Once this counter hits 100%, the printer locks itself down to prevent waste ink from overflowing and ruining your desk.
Your printer believes the ink pads are empty, but physically, they are still dirty. If you reset your printer multiple times without addressing the physical ink accumulation, the waste ink will eventually overflow out of the bottom of the printer. What you should do next:
Two possibilities:
: Turn the printer off and then back on to finalize the process. Hardware Maintenance
A: No, a resetter resets the current counter to zero. As you continue using the printer, the counter will increase again and will eventually need another reset.
Because the printer cannot physically measure how full the sponge is, it relies on a digital built into the printer's firmware. Every cleaning cycle adds points to this counter. The Blockade Symptoms
A: Most dedicated resetter software (like WIC Reset) is designed for Windows. Some online services claim compatibility, but many reset tools do not work on macOS. Check the system requirements before purchase. If you reset the counter multiple times without
Note: These tools are often unsigned 3rd-party software. Use at your own risk. Many are free but some ask for a donation.
If the resetter shows an "I/O service could not perform operation" error, it means the Epson Status Monitor is blocking the resetter's access. To fix this, you can temporarily disable the Epson Status Monitor service in your computer's task manager, restart the printer and the program, and then try the reset again.
A: No, the printer will lock itself and refuse to print until the counter is reset.
A: Yes. If the physical ink pad is already full, resetting the counter without replacing the pad can lead to internal ink leakage, which can cause short circuits and permanently damage the printer's electronics. Buy a cheap set of replacement felt pads online
A pop-up window will appear asking for confirmation. Click . Step 4: Finalize the Cycle