Fagor Fi80 Dishwasher Manual [better] Access

Features stainless steel heating elements in both the wash tank (4.5kW) and the rinse boiler Construction:

Remove front-right filter; check the overflow tube and drain hose for kinks. Blocked nozzles or improper loading

Place plates face-forward in peg racks. Place cups, glasses, and bowls upside down in flat racks. Do not overlap items.

If an error persists after trying the recommended actions, contact the FAGOR Technical Assistance Service (SAT) for professional support.

Select the appropriate cycle for the dirtiness of the dishes. fagor fi80 dishwasher manual

* 0 TABLE OF CONTENTS. 0 TABLE OF CONTENTS ________________________________________________________ I. 1 QUICK START GUIDES ______ Parts Town Dishwashing - Fagor Professional

Wait 120 seconds until the cycle light turns off. Allow steam to escape for a few seconds before pulling out the rack. Troubleshooting Error Codes and Common Issues

Reset the high-limit thermostat; Call a technician to test elements.

If your Fagor FI-80 experiences operational issues, consult this basic troubleshooting matrix before calling a service technician. Potential Cause Recommended Solution Features stainless steel heating elements in both the

Remove and clean the filter and scrap baskets. Wipe down the interior and leave the hood open overnight to dry.

Maintain a flowing pressure between 20 and 25 PSI. Install a pressure-reducing valve if your pressure exceeds 25 PSI.

Before starting, verify there are no water or electrical leaks. 2. Operating the Fagor FI-80 The FI-80 is designed for simplicity.

Drain the machine completely, refill with clean water, and run one final cycle to rinse away toxic chemicals. 5. Troubleshooting Common Issues Do not overlap items

This guide serves as a comprehensive reference manual for installing, operating, and fixing the Fagor FI-80 dishwasher. Technical Specifications

: For a complete list of internal components, including part numbers for filters, heating elements, and the hood assembly, refer to the Fagor FI-80 Spare Parts Manual .

Check your external chemical pump supply lines. Ensure the detergent pickup tube is not drawing air. The Machine Keeps Draining / Won't Hold Water

Allow 20 to 30 minutes for the unit to heat up. Do not run a cycle until the "Machine Ready" light turns on, confirming the water has reached 140°F (wash) and 180°F (rinse). Loading and Washing