Comprehensive Guide to the TVZT-3010-03UP LED Go to product viewer dialog for this item. Backlight Strip
) : Rated for a nominal operating current of . Exceeding these thresholds without adequate thermal dissipation risks rapid thermal runaway.
: Clean the mounting area of any dust or debris to ensure proper heat dissipation and adhesion. 2. Physical Installation
Designed to be both bright and energy-efficient. tvzt-3010-03up led
+5V --- [100Ω Resistor] ---|>|---- GND (TVZT-3010)
Use a (Infineon) or NSI45020 (ON Semi) driver IC.
provides the correct forward current (often regulated by constant current drivers like 350mA variants). Replacement Compatibility Comprehensive Guide to the TVZT-3010-03UP LED Go to
The is best suited for low-power status indicators (backlights, button illumination, small arrays). Do not use it for general illumination or high-heat environments (e.g., automotive headlights).
Some users choose to remove the LED module and install a standard GU10 socket and bulb.
: In native series configurations, the forward voltage drop across the system generally falls within a DC 6V to 10V threshold. Primary Applications : Clean the mounting area of any dust
When opening up your outdoor light fixture to interact with the TVZT-3010-03UP
Swap the entire strip (it is recommended to replace all strips at once for longevity). Reassemble: Carefully reassemble the panel. Where to Find Replacement Parts
Allow the fixture to cool. Check if thermal paste dried out or if the driver needs replacement.
Touch the positive (red) probe to the anode and the negative (black) probe to the cathode.
Measure the package with calipers. If it is exactly 3.0mm x 1.0mm, treat it as a 3014-class LED for thermal and current estimation.