The printer must be connected via a (Wi-Fi will not work).
If successful, a small dialogue box will pop up saying "A function was finished" or "Operation completed successfully."
Once the tool has completed its operation and shows a success message, you must exit Service Mode by pressing the Power button to turn the printer off. Disconnect the USB cable, wait 10 seconds, and then turn the printer back on normally. The error should be cleared. canon service tool v5306 exclusive
Press and hold the button while holding the Stop button. Release the Stop button, then press it 5 times. Release the Power button. The green light should be solid. 3. Run the Tool Download and open the Canon Service Tool v5306.exe .
Turn the printer back on normally. Your error code should be completely cleared. Critical Safety Warning: The Physical Waste Pad The printer must be connected via a (Wi-Fi will not work)
The Service Tool can only communicate with the printer when it is in a special "Service Mode." Follow these steps exactly:
Turn off the printer and redo the button-pressing sequence carefully. Try pressing the Stop button 6 times instead of 5. Function not supported The error should be cleared
Look for the section on the main interface page.
The tool works with a wide range of PIXMA G-series and MG-series printers, such as: : G1000, G2000, G3000, G4000.
The Canon Service Tool V5306 offers a range of benefits for technicians and advanced users who work with Canon printers. Some of the key advantages of using this software tool include:
If your printer is from the list above, the