How To Fix A Insinkerator Garbage Disposal Hot ((install))

Insert a (InSinkErator Jam-Buster tool).

Locate the small reset button, which is usually red or black and protrudes slightly from the bottom or side of the housing.

Insert the silver, hexagon-shaped wrench (or a standard 1/4-inch Allen wrench) into the hole.

If you follow this guide, you will fix a hot InSinkerator 90% of the time without spending a dime. Only when the reset button glows red with defeat (or the smoke escapes) should you head to the hardware store for a replacement. how to fix a insinkerator garbage disposal hot

, it is likely jammed, which causes the motor to work harder and overheat.

Turn off the wall switch that controls the garbage disposal.

An overheated InSinkErator will not restart until the internal thermal slip has cooled. Insert a (InSinkErator Jam-Buster tool)

If the unit is hot and not turning on, the reset button has likely tripped.

The first and easiest step is to reset the disposal's internal circuit breaker.

You cannot reset a hot InSinkErator. The thermal switch is bimetal; it only resets when cold. If you follow this guide, you will fix

If the reset button didn’t solve the problem, or if the unit was humming (making a buzzing sound but not spinning) before it got hot, the motor is likely jammed by a foreign object or food buildup. You can clear this manually:

Caution: If the reset button pops right back out immediately, or if the unit is extremely hot to the touch, wait 10 to 15 minutes for the motor to cool down before trying to press it again. 3. Clear the Jam Manually

Turn the wall switch on. The unit should hum to life smoothly. Let it run for 30 seconds with the water running to flush out any remaining debris. Common Causes of an Overheating Disposal

Once the flywheel is free, the debris that caused the jam may still be inside the grind chamber.

Immediate actions (if disposal is hot now)