Aodelan Wtr2 User Manual

: A single transmitter can control multiple receivers simultaneously, which is useful for multi-camera setups. Timer and Release Modes

If the system fails to trigger your camera, check the following common failure points. Common Issues and Solutions

Plug the shutter release cable into the receiver’s "OUT" port and your camera’s remote terminal. aodelan wtr2 user manual

: Supports half-press for autofocus and full-press for triggering the shutter.

Key applications include:

Plug the shutter cable into the receiver and camera.

The WTR2 works up to 60 meters (196 feet) . You don't need a line of sight, as the 2.4GHz signal passes through most obstacles. Troubleshooting Common Issues : A single transmitter can control multiple receivers

Perfect for manual long exposures. Press once to start the shutter and once to close it. 2S (2-Second Delay): A simple self-timer mode.

Follow this template to capture a 200-frame time-lapse sequence with a 5-second interval, omitting initial camera shake with a 10-second countdown delay. : Supports half-press for autofocus and full-press for

Used for manual long exposures. Press once to open the shutter, and press again to close it.