Unscrew the heatsink screws in the order marked on the assembly (usually marked 1, 2, 3, 4) to prevent warping. Carefully lift the fan and heatsink assembly out.
Before snapping all the outer plastic cover clips back together, temporarily attach the stand and power cord to verify the machine boots to BIOS/Windows successfully.
Remove the screws securing the metal drive caddy to the computer chassis.
Slowly work your way around the edges. You will hear "pop" sounds as the internal plastic clips release. Avoid using metal tools that can mar the plastic or damage internal ribbon cables. acer aspire zc610 disassembly full
Lay down a soft towel, microfiber cloth, or foam padding on your work table. You will place the computer face-down, and you must prevent the glass from scratching.
Gently pop the clips by twisting the pry tool, moving slowly along the bottom edge, up the sides, and across the top.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Unscrew the heatsink screws in the order marked
To avoid damaging data storage devices, remove them early in the disassembly process. The Hard Drive
The heavy rear stand must be detached first to allow the computer to lie completely flat on your workspace.
Essential for popping open the plastic clips on the outer casing without scratching or cracking the frame. Remove the screws securing the metal drive caddy
This guide is for educational purposes. Disassembling your device will void any remaining warranty. The author assumes no responsibility for damage to your hardware or personal injury. Always disconnect power before servicing.
Remove the screws securing the cooling fan housing to the frame and lift the fan out. Clean any dust buildup out of the fan blades.
The heavy outer stand must be removed first to gain access to the back cover chassis screws.
