(sometimes included, but a larger one ensures better accuracy) Pencil for marking Socket wrench or ratchet Phillips screwdriver Step-by-Step Installation Instructions 1. Prepare the TV Brackets
Mark four to six mounting holes across the length of the plate, ensuring they are evenly spaced.
Tighten the screws firmly, but do not over-tighten, as this could damage the internal components of the TV. Step 2: Locate Studs and Mark the Wall
Use the built-in tilt adjustment (if applicable) by loosening the tilt bolts, setting the angle, then re-tightening. equatech universal tv wall mount 32 to 100 instructions
For large TVs (up to 100 inches), it is to secure the mount into wooden wall studs rather than just drywall.
The Ultimate Installation Guide for the Equatech Universal TV Wall Mount (32" to 100")
If your model has safety screws: Use a long Phillips-head screwdriver to tighten the safety screws at the bottom of both brackets. These screws extend upward behind the lower rail of the wall plate, preventing the TV from accidentally lifting off or sliding off the sides of the mount. (sometimes included, but a larger one ensures better
Installation Guide
: Essential for locating wooden studs in plasterboard walls.
Slowly lower the bottom of the television until the vertical brackets rest naturally against the bottom rail of the wall plate. Step 2: Locate Studs and Mark the Wall
The Equatech Universal TV Wall Mount 32 to 100 is a reliable and versatile solution for mounting your TV on the wall. By following these instructions and taking the necessary precautions, you can enjoy a secure and stable TV mounting solution. If you have any questions or concerns, refer to the instruction manual or contact the manufacturer's customer support.
Always use a stud finder with live-wire detection to ensure you do not drill into electrical wiring or plumbing pipes inside the wall. Required Tools and Materials
If your model features safety screws: Look beneath the bottom rail of the mount. Use a long Phillips head screwdriver to tighten the safety screws upward until they lock firmly behind the bottom lip of the wall plate.
: Place the TV face-down on a soft, flat surface like a blanket to prevent screen damage.
Lay a soft blanket or foam packaging on a flat, sturdy table or on the floor. Carefully place your television screen-face-down onto the protected surface.
