| Code | Parameter | Function | Typical Range | | :--- | :--- | :--- | :--- | | | Differential / Hysteresis | Defines the temperature band where the output switches. | 1°C – 30°C | | P2 | Offset / Calibration | Adjusts the sensor reading to correct for sensor drift or cable length. | -10°C to +10°C | | P3 | Output Direction | Defines if the controller heats or cools. (Direct vs. Reverse acting). | Heat / Cool | | P4 | Min Scale | Low limit for display range. | -50°C | | P5 | Max Scale | High limit for display range. | +150°C | | P6 | Sensor Type | Selection of Pt100 or Pt1000 (if universal input model). | - |
The most fascinating section of the manual covers the dial. The 2100 TP does not have a traditional face. Instead, it features an sitting beneath a sapphire crystal.
Understanding the limits and capabilities of the Tudor 2100 TP ensures accurate diagnostics and prevents hardware damage. Key Specifications
: Always stop the charging cycle using the physical control panel buttons before disconnecting the battery plugs to prevent dangerous electrical arcing. tudor 2100 tp manual
Thanks in advance!
Upon connection, the charger performs an automatic diagnostic test by cycling through its LEDs to verify battery status. Protective Systems:
The unit delivers a constant maximum current to quickly bring the battery up to roughly 80% capacity. | Code | Parameter | Function | Typical
Use a microfiber cloth for daily cleaning. For deeper cleans, use a soft-bristled toothbrush, mild dish soap, and warm water to clean the stainless steel bracelet links where dirt accumulates. Service Intervals
Follow these exact steps to perform a standard battery load test using the Tudor 2100 TP. Step 1: Inspection and Preparation
The Service Manual provides extensive troubleshooting codes (e.g., F7 for incorrect battery voltage or F21 for overcurrent) that allow technicians to quickly identify hardware or connection issues. (Direct vs
The refers to a high-frequency industrial battery charger , primarily used for lead-acid batteries in traction and motive power applications (e.g., forklifts or pallet jacks). 1. Getting Started: Installation & Safety
charger is a specialized high-frequency charger designed for efficiently charging industrial batteries, such as those found in forklifts, pallet jacks, and other electric materials handling equipment.