[Satlink WS 6933] ---> (Mini-USB Cable) ---> [Windows PC running CH340 Driver] | (Detected as COM Port)
He used the soldering iron to short two pins on the flash memory chip—a crude, dangerous method to induce a checksum error during the read cycle. On the third attempt, the screen glitched. Then:
Updating the software is a manual process typically used to refresh the built-in Transponder (TP) list, add new satellites, or resolve minor system bugs. Unlike modern connected devices, this meter does not support automatic over-the-air updates and requires a physical connection to a computer. How the Update Process Works
Use the specialized Satlink Tools software provided with your purchase. satlink ws 6933 software update work
This article provides a comprehensive guide on how the works, how to prepare for it, and the safest methods to ensure your meter remains a reliable tool. Why Perform a Satlink WS-6933 Software Update?
Select , locate your downloaded binary, and click Process .
Connect the Satlink WS-6933 to your computer via USB and turn the meter's power switch to . Open your Windows Device Manager . If you see a yellow warning triangle under "Ports (COM & LPT)", download and install the CH340 USB-to-Serial Driver . Once installed, it will display a designated port number (e.g., COM3 ). Step 2: Extract and Back Up Existing Data Digital satellite finder software update Process [Satlink WS 6933] ---> (Mini-USB Cable) ---> [Windows
Do you already have the , or do you need help finding it? What operating system is your computer running?
A legitimate WS 6933 firmware is exactly 1,048,576 bytes (1 MB) or 2,097,152 bytes (2 MB), depending on version.
Set the Upgrade Type to "AllCode" to ensure a clean installation. Step 4: Executing the Update Unlike modern connected devices, this meter does not
until the progress bar reaches 100% and a success message appears. : Restart the meter normally and navigate to System Setup in the menu to check that the software version has updated. Key Benefits of Updating Updated TP Lists
The software tool should now display a "Connected" status, and a progress bar will show the data transferring from the PC to the satellite finder.
801 777 223
Your basket