Enables programming of RX/TX frequencies, QT/DQT (CTCSS/DCS) tones, wide/narrow channel spacing, and priority scanning. Target Radios: IC-F310, IC-F320, IC-F410, IC-F420.
At 78%, the laptop’s fan roared. A red error box appeared.
If using a USB cable, ensure you have the correct Prolific or FTDI drivers installed to prevent "COM Port Not Found" errors. 🛠️ Step-by-Step Programming Process
Edit memory channels, set scan lists, and configure DTMF/5-Tone signaling. 🔌 Necessary Hardware Icom Ic-f310 Programming Software
The Icom IC-F310 is a popular two-way radio used by businesses, organizations, and individuals for reliable communication. To get the most out of this device, users need to program it with the right software. In this article, we will explore the Icom IC-F310 programming software, its features, and how to use it to configure your radio.
Have a tip for programming the IC-F310 that we missed? Leave your driver version and cable model in the comments below.
The correct software version for this legacy radio series is EX-1768 (often referred to simply as the IC-F310/F410 cloning software). It is designed to run in DOS or legacy Windows environments. A red error box appeared
Last updated: October 2025. Icom, IC-F310, and CS-F310 are trademarks of Icom Inc. All other trademarks are property of their respective owners.
Some third-party "all-in-one" USB programming cables available on sites like Unicom Radio AliExpress eliminate the need for a separate adapter. Programming Process Overview
This radio is particularly noteworthy because its programming method represents a "transitional" technology. The early IC-F310 models rely on (EX-2057), while later models or specific "S" variants (like the IC-F310S) utilize a Windows-based interface known as CS-F300S . Consequently, "Programming the Icom IC-F310" is not a one-size-fits-all process; you must first identify which software your specific radio requires. 🔌 Necessary Hardware The Icom IC-F310 is a
Map the front-panel programmable keys (P0, P1, P2, P3) to functions like Monitor, Scan, or High/Low power toggle. Step 5: Writing to the Radio
The "S" suffix models typically denote variations with different feature sets or regional specifications. While the non-"S" and "S" variants are generally associated with different software packages, users have also reported success using the software with the standard IC-F310.
Since this is legacy equipment, the software was originally designed for older versions of Windows. If you are using Windows 10 or 11, you may need to run the application in Compatibility Mode . Step-by-Step Programming Guide 1. Connection and Driver Setup
Icom CS-F300 Revision 2.1 Programming Software for ... - eBay