If you are reading this, you likely possess one of the most coveted pieces of PC hardware history: the (Super Magna ATX). Alternatively, you might have just acquired one on the secondary market for a small fortune.
Up to a 480mm or 560mm radiator in the side-loading lower compartment.
Specifically used for mounting 2.5-inch SSDs and certain optical drive brackets.
With the frame squared and cooling brackets planned, proceed to component integration. Motherboard & Stand-offs caselabs sma8 manual
The SMA8 offers unparalleled liquid cooling versatility. Use this configuration table to plan your loop optimization. Maximum Radiator Size Supported Fan Configuration Up to 480mm (4x120mm) or 560mm (4x140mm) Push, Pull, or Push/Pull Requires specific top-cover clearance Bottom Chamber (Side) Up to 480mm (4x120mm) or 560mm (4x140mm) Push/Pull dual setups Fits on dedicated slide-out mounts Front Bay Up to 360mm (3x120mm) Push or Pull Requires sacrificing Flex-Bays Rear Mount 120mm or 140mm Single exhaust fan Ideal for 140mm AIO or exhaust Installing Lower Basement Radiator Mounts
Stand the front frame piece upright against the bottom floor panel. Secure it from underneath and from the inside using 6-32 x 1/4" screws. Do not tighten them completely yet; leave a small amount of play for alignment.
Use the dedicated, hidden areas behind the motherboard tray and in the lower chamber to manage cables. If you are reading this, you likely possess
: Join the top and front panels using countersunk screws, followed by the divider and mid-plate.
If you are building from scratch or reassembling a used case, follow this general order of operations: Frame Foundation
Clean exclusively with a damp microfiber cloth. Avoid harsh chemical solvents or alcohol-based cleaners, as they can degrade or discolor the finish over time. Specifically used for mounting 2
The SMA8 manual outlines a specific, modular assembly process. It is highly recommended to follow these steps sequentially to avoid damaging the aluminum panels. Phase 1: The Foundation and Bottom Assembly
: The case features a "Flex-Bay" system that allows you to customize the front I/O and drive configurations, supporting up to thirteen 5.25-inch drives or various fan/radiator mounts. Manual & Assembly Overview