Lantek Expert Tutorial Better Direct

Utilize the feature, which snaps parts next to each other while respecting your predefined safety clearances. 5. Applying CAM Lead-ins, Lead-outs, and Cutting Paths

Lantek allows you to bring in geometry or create it from scratch: lantek expert tutorial

Define the Part Attributes. Assign the material type (e.g., Stainless Steel) and the thickness (e.g., 2mm). Utilize the feature, which snaps parts next to

Lantek's Undo/Redo options let you adjust and retry as much as needed. Explore tools like Align, Attach, Separate, and everything under the Transform tab. Assign the material type (e

The entry and exit points for the torch. Right-angle or arc lead-ins are typically placed on corners to prevent piercing blemishes on the finished part edges.

Use the cleaning tools to remove duplicate lines, close gaps, or fix overlapping geometry to ensure clean cutting paths.

Assign the specific material (e.g., Mild Steel, Stainless, Aluminum) and the sheet thickness. This determines the cutting parameters (feed rate, gases, etc.) used later.