Upgrade Medianav 9.1.3 To 1.0.13.1

If you acquire a MediaNav Evolution v2 unit (version 1.0.x.x), follow these steps for the replacement:

The screen may turn black or restart several times. This is normal. Do not remove the USB drive or turn off the ignition until the radio returns to the main menu and displays the home screen. Troubleshooting Common Issues

This happens if power was interrupted or the file was corrupted. You will need to download a "MediaNav recovery" package ( upgrade_duster.lgu or specific bootloader files) onto your USB drive to reset the memory chips.

To achieve the 1.0.13.1 user interface, features, and stability on a 9.1.3 device, you must use a custom, modified firmware package (often called a "custom ROM" or "skin mod") specifically ported by the MediaNav modding community. Alternatively, you must physically swap your old 9.1.3 head unit for a newer 1.0.13.1 hardware unit. This article focuses on the software modification route. Prerequisites and Requirements upgrade medianav 9.1.3 to 1.0.13.1

Method 2: Physical Hardware Upgrade (True 1.0.13.1 with CarPlay)

The Renault and Dacia MediaNav infotainment system is a reliable dashboard companion, but older software versions can feel sluggish and outdated. Upgrading your MediaNav Evolution from firmware version 9.1.3 to 1.0.13.1 is one of the best ways to modernize your driving experience.

To transition from 9.1.3 to 1.0.13.1, you must perform a by replacing your current head unit with a newer Evolution v2 unit. Hardware Upgrade Process If you acquire a MediaNav Evolution v2 unit (version 1

Once the screen shows that the update is successful, remove the USB drive. The system will restart into the new 1.0.13.1 interface. Phase 3: Post-Upgrade Verification Once the upgrade is complete, verify the new version: Go to Settings on your MediaNav home screen. Select System . Select System Version .

If a hardware swap is not an option, you can still improve your 9.1.3 system:

The upgrade from Medianav 9.1.3 to 1.0.13.1 transforms your driving experience. The system no longer feels like outdated tech from 2012; it becomes a reliable, snappy infotainment center. While the process requires patience and careful USB selection, the stability gains and bug fixes make it the single best free upgrade for your Renault or Dacia. Troubleshooting Common Issues This happens if power was

Remove the USB flash drive from the car. Delete the upgrade.lgu file from the drive on your computer so the car does not attempt to reinstall it next time. Troubleshooting Common Issues

[Old Setup: 9.1.3 Hardware] ---> Remove Plastic Trim ---> Unplug Wiring Harnesses | [New Setup: 1.0.13.1 ULC4] <--- Clip Trim Back On <--- Connect Facia & Wires Step 1: Extracting the Old Unit

I can provide more specific instructions or advice on whether to upgrade to 1.0.13.1 or use a tool like Menaco.

A faster, smoother user experience compared to the old Windows-based system.

You cannot natively install software version 1.0.13.1 onto a standard 9.1.3 hardware unit using official Dacia/Renault Toolbox software. Attempting to force an official MN3 update file onto an MN2 board will result in a permanent bootloop.