G Star Iv Gps Driver [2021] - Download Bu-353s4 Windows 11

Alternatively, you can download the Prolific Driver Installer v4.0.8 which is recommended for BU-353S4 users on modern systems. :

: Must exactly match the port designated in your Windows Device Manager. Inside Buildings

Follow these steps to ensure the driver is installed correctly: Step 1: Download and Extract

Download the G Star IV GPS driver for Windows 11 today and enjoy accurate and reliable navigation! G Star Iv Gps Driver Download Bu-353s4 Windows 11

: Download and run the PL2303_DriverInstaller.exe as an administrator.

Download the PL2303 Prolific driver installer (e.g., PL23XX_Prolific_DriverInstaller_v408.zip ) and extract the contents to a folder on your desktop. Step 2: Run the Installer Open the extracted folder.

Change COM port number.

The BU-353S4 needs a clear view of the sky for 2–3 minutes for a cold start. Place it on a windowsill or outdoors. Use free software like VisualGPS or U-Center to see satellite signal strength.

G-Star IV GPS Driver Download: How to Install the BU-353S4 on Windows 11

Uncheck "Show compatible hardware" if necessary, but ideally, you will see a list of driver versions. Select (or another version from 2008–2014). : Download and run the PL2303_DriverInstaller

Windows 11 may try to install a generic driver, but it often fails with a Code 10 error (device cannot start). The official Prolific driver fixes this.

Plug your GlobalSat BU-353S4 GPS receiver into a USB port on your Windows 11 PC. Step 4: Verify in Device Manager Right-click the and select Device Manager . Expand the Ports (COM & LPT) section. You should see Prolific USB-to-Serial COM Port (COMx) .

: Must be set to 4800 (the standard NMEA 0183 speed for this device). Protocol : NMEA 0183 Change COM port number