For a full user manual, search for the document with the reference 880NSL-PDF on technical repository sites or contact AMETEK Process Instruments directly for authorized documentation.
Direct pipe mount via a 2-inch 150 lbs (or DIN equivalent) RF flange. Electrical: 120/240 VAC, 50/60 Hz, 720W single phase. Instrument Air: 70 to 100 psig (490 to 700 kPa). Steam (Optional):
: Designed for outdoor installation and certified for NEC/CEC Class I, Division 2 hazardous locations. Safety Warnings
Regular verification of the +0.5% full-scale sensitivity. 6. Accessing the AMETEK 880-NSL User Manual PDF ametek 880-nsl user manual pdf
Inspect the UV lamp intensity. If the lamp signal drops below 20% of its original value, it may require replacement.
: Housed in a 316 stainless steel enclosure rated for hazardous areas (Class I, Division 2 or Zone 1). AMETEK PROCESS INSTRUMENTS Performance Specifications Specification Methodology Non-dispersive ultraviolet (NDUV) spectroscopy Measurement Range Typically 0–1% cap S cap O sub 2 and 0–2% cap H sub 2 cap S Response Time 90% in less than 15 seconds (typical) of full scale Ambient Temp
AMETEK Western Research, Newark, DE.
: Older as-built block diagrams and electrical power requirements (e.g., 240V 50/60Hz, 720W) are often available through authorized distributors like between the 880-NSL and the newer USER MANUAL - AMETEK PROCESS INSTRUMENTS
: It features a solid-state detector with no moving parts and a lamp life estimated at up to five years, significantly reducing the frequency of technician intervention. Operational Integrity
Easy pipe-mount installation (typically 2-inch 150 lbs flange) For a full user manual, search for the
Features a maintenance-free aspirator that pulls samples directly from the process line.
: Includes a calibration filter for automatic span verifications and continuous self-monitoring with built-in alarms. Installation & Utility Requirements