Thyssenkrupp Levant Stair Lift Installation Manual Full 2021 -

: Used to rotate the chair (typically only at the top of the stairs) for safe entry and exit. Safety & Maintenance Weight Limit : The Levant has a maximum weight capacity of Battery Care

: A comprehensive 25-page ThyssenKrupp Levant User Manual is available for free online, covering daily operation and basic safety.

Do not fully torque the screws until you verify the carriage moves smoothly over the joints. 4. Mounting the Carriage and Seat

“Damage resulting from improper installation, including but not limited to incorrect bracket spacing, improper grounding, or failure to use factory-specified hardware, shall void all warranties.” thyssenkrupp levant stair lift installation manual full

Insert the internal alignment bars (splice plates) into the channels of the first rail section.

The Levant rail mounts directly to the stair treads, never to the wall. It can be installed on either the left or right side of the staircase. Step 3.1: Laying Out the Rail

Installing a ThyssenKrupp Levant stair lift requires precision, safety awareness, and a systematic approach. This comprehensive guide walks you through the complete installation process, duplicating the technical steps found in the official factory installation manual. Pre-Installation Preparation and Tools : Used to rotate the chair (typically only

Remember, the signature of a certified professional on the installation certificate is the only guarantee that your thyssenkrupp levant stair lift has been installed safely, correctly, and in full compliance with the official .

If your rail arrived in multiple sections, you must join them together before securing them to the stairs.

Lay the rail sections flat on a protected surface aligned end-to-end. It can be installed on either the left

Press the directional trailing edge covers on the carriage body. The lift must stop traveling in that direction.

Once the chassis is safely secured on the rail, the seat assembly can be mounted.

: The motor/drive unit is slid onto the rail. Ensure the rack-and-pinion teeth are correctly engaged. Charging Contacts