Robopac Robot 2001 Manuale Work

| Specification | Details | | :--- | :--- | | | ROBOT 2001 / 2001 FR | | Manufacturing Years | Circa 2000 - 2002 | | Weight (approx.) | 395 kg (871 lbs) to 415 kg (915 lbs) | | Dimensions (LxWxH) (approx.) | 1900 x 1010 x 2400 mm | | Power Supply / Electrical | 220V, 6.1A, 50 Hz. It is also powered by a 150 Ah rechargeable battery system | | Maximum Working Height (approx.) | 2150 mm (7.05 ft) / 2200 mm | | Controls | The user interface includes a control panel with buttons and a display for parameter selection and adjustment | | Main Features | Adjustable rotation speed. Adjustable raising/lowering speed of the film carriage |

| Code / Signal | Description | Probable Cause | Suggested Solution | | :--- | :--- | :--- | :--- | | | Emergency Stop Activated | The red emergency button(s) are pressed or stuck | Check and release the emergency stop switch(es) | | E002 | Safety Door Open | A safety interlock door or sensor is open | Check that all safety doors and panels are fully closed and latched | | E003 | Film Carriage Sensor Fault | A sensor on the film carriage is dirty, loose, or has failed | Clean the sensor. If the issue persists, inspect wiring and replace if necessary | | E101 | Turntable Motor Overload | The load on the turntable is too heavy or there is a mechanical jam | Reduce the weight of the load. Inspect the turntable gears and drive motor for obstructions | | E102 | Carriage Motor Overload | Excessive tension in the film or resistance on the carriage rails | Lubricate the carriage guide rails. Check motor wiring | | E201 | Film Not Detected | The stretch film roll has run out, broken, or a sensor has failed | Install a new roll of film. Check the tension arm and the film presence sensor | | E202 | Film Pre-Stretch Error | The pre-stretch rollers are misaligned or failing to tension the film correctly | Inspect and recalibrate the pre-stretch system. Check for worn or damaged rollers | | E203 | Film Cut or Clamp Failure | The pneumatic cylinder for the cut/clamp system is jammed or there is a loss of air pressure | Check the air pressure supply to the machine. Inspect the cut/clamp mechanism | | "2001" Alarm | Generic Alarm Signal | This is indicated as a "thermal cutout" alarm. These alarms can be for the main inverters on the ring, infeed, or outfeed conveyors. | The resolution is specific to the "2001" error notification. Check the machine's display panel. |

Adjusts how fast the robot circles the pallet. robopac robot 2001 manuale work

Know the location of the red emergency stop button.

Ideal for high-capacity wrapping and unstable pallets. 2. Safety Guidelines (Manuale di Sicurezza) Before attempting to operate the Robopac Robot 2001 | Specification | Details | | :--- |

Automatic stop sensors to prevent accidents.

: It possessed a "magic eye"—an infrared photocell that could sense exactly where the pallet ended, even at heights up to 2,500 mm. The Spool Carriage If the issue persists, inspect wiring and replace

for precise technical data, as older machines may have variations in functionality. user manuals - Robopac USA

: Managed via an integrated electromagnetic friction brake mechanism.

Clear the area of obstacles. The surface must be level. 3.2 Loading the Film (Manuale Procedure) Open the carriage cover. Insert the film roll onto the spindle.

Maintaining older, reliable machinery is often the key to a productive warehouse. The Robopac Robot 2001 Go to product viewer dialog for this item.