Canon G3400 Reset Jun 2026

Low ink warnings appearing after a refill.

Warning: Downloading Service Tools from the internet carries a risk of malware. Ensure you trust the source or consult a professional technician.

The Canon G3400 does not have electronic chips on its ink tanks to track volume. Instead, it estimates ink usage mathematically. If you refill the mega-tanks but the printer still warns you that ink is low, you must manually reset the monitoring system.

Once the green light is stable and the printer is in Service Mode, you can manually reset the counter: canon g3400 reset

Release the button. The green power lamp will flash and then stay lit.

If your Canon G3400 is disconnecting from your Wi-Fi or you have changed your router settings, you can reset the network card back to its factory defaults. Turn the printer .

While resetting the counter allows the printer to work again, the ink pads are genuinely getting full. Continuing to print without eventually cleaning or replacing these pads can cause ink to overflow and leak out of the bottom of the printer. Service Mode Risk: Low ink warnings appearing after a refill

Performing a hardware reset can clear these errors and bring your printer back to life. This comprehensive guide walks you through the step-by-step methods to safely reset your Canon Pixma G3400. Why Does Your Canon G3400 Need a Reset?

an authentic version of the Canon Service Tool (ST4905, ST5103, or ST5302).

Press and hold the until the Power lamp flashes once. Release the Wi-Fi button. The Canon G3400 does not have electronic chips

Turn the printer off by pressing the Power button, and then turn it back on.

To help give you the exact steps or tools for your situation, tell me: Are you trying to clear a (like 5B00)? Is your printer currently connected to a Windows PC or Mac ?

During tasks like turning the printer on, deep cleaning the printheads, and printing edge-to-edge photos, a small amount of ink is naturally purged. This ink goes into an absorbent sponge (the waste ink absorber) located at the bottom of your printer.

Method 2: Resetting via Service Mode (Fix for Error 5B00 / Ink Absorber Full)