Do not plug the USB cable into your computer yet.
This report provides a detailed guide on installing the RedSail cutting plotter software on your computer. By following these steps, you should be able to successfully install and configure the software for use with your cutting plotter. If you encounter any issues during installation or operation, refer to the troubleshooting section or contact RedSail support for assistance.
, choose the connection type (USB) and the appropriate port. 3. Port & Parameters Setup redsail cutting plotter software installation
Before installing any software, prepare your workspace and computer to avoid communication errors.
: Once installed, open your computer's Device Manager and look under "Ports (COM & LPT)" to find the assigned COM Port number (e.g., COM3). Do not plug the USB cable into your computer yet
Complete Guide to Redsail Cutting Plotter Software Installation
RedSail plotters typically work with one of these programs: If you encounter any issues during installation or
Check the COM port settings. If using USB, ensure the USB-to-Serial converter driver is properly installed in the Device Manager.
Regular cutting works, but print-and-cut (contour cutting) fails. Solution: This is not a driver problem but a software registration issue. You need the "RedSail Contour Plugin" or must upgrade SignMaster to the "ART" or "CUT" version. Standard drivers do not support optical registration marks.
Setting up a Redsail cutting plotter can feel daunting, but the process is straightforward once you understand the relationship between the drivers and the design software. Whether you are using Artcut, FlexiSign, or Easy Cut Studio, this guide will walk you through the essential steps to get your machine running on Windows or Mac. Step 1: Install the USB Driver