If you have any questions about this, I can of other field meters. Or if you have a specific problem, tell me what type of components you are protecting (IC, board, finished device) and what your biggest concern is (getting data, protecting from discharges, testing ionizers), and I can offer specific advice.
Simco FMX-002 Electrostatic Fieldmeter Go to product viewer dialog for this item.
| Specification | Detail | Note | | :--- | :--- | :--- | | | 0 to ±20 kV | Auto-ranging (Lo: 0-±1.49 kV, Hi: ±1.0-20 kV) | | Measurement Distance | 25mm (1 inch) | Ensuring consistency | | Distance Guide | 2 integrated LEDs | Lamps converge when at the correct distance | | Display | Dual-mode: Digital & Graphic | Numbers + bar graph polarity indicator (Red=Positive, Blue=Negative) | | Accuracy | ±10% of reading | | | Response Time | 1 second | 5 updates/sec on the LCD display | | Power Supply | 9V battery (6F22/MN1604) | | | Auto Power Off | After approximately 5 minutes of inactivity | Preserves battery life | | Operating Environment | 10°C to 40°C, <60% RH | | | Dimensions (HWD) | 115 x 65 x 25 mm | Pocket-sized design | | Weight | Approximately 130g with battery | Lightweight and portable |
Do not wear synthetic clothing (like nylon) that produces high static when taking measurements. 6. Calibration and Maintenance simco fmx002 manual top
Ensure the grounding wire is securely connected to an active ground point. Check if the sensor opening is contaminated.
1 inch ±1/32 inch (25mm ±1mm) from the target surface. Accuracy: ±10% of the displayed value.
relies on tight geometric placement and internal calibration parameters to ensure accurate field readings. 0 to ±plus or minus 1.49 kV (Low Range); ±plus or minus ±plus or minus 20.0 kV (High Range). Ion Balance Range: 0 to ±plus or minus 200 V (with detachable plate assembly). Target Measuring Distance: 1 inch ±plus or minus 1/64 inch (25 mm ±plus or minus Accuracy: ±plus or minus 10% of the read value. Sampling Display Rate: LCD updates 5 times per second. Power Supply: 9V Manganese battery (Type 6F22). If you have any questions about this, I
The Simco FMX-002 is a legacy handheld electrostatic fieldmeter designed for the accurate measurement of static voltages. While newer models like the FMX-003 and FMX-004 have since been released, the FMX-002 remains a reliable tool in many electronics manufacturing and cleanroom environments. This manual overview covers the essential technical specifications, operational procedures, and maintenance tips to ensure your device provides precise readings. Technical Specifications and Features
The manual’s top safety warnings include:
They can email you a PDF if the product is discontinued (FMX-002 is an older model; newer version is FMX-004). | Specification | Detail | Note | |
When the battery icon blinks or shows empty, open the compartment on the back of the unit. Replace it with a high-quality 9V alkaline battery. Remove the battery entirely if the fieldmeter will be stored unused for more than 30 days. Common Troubleshooting Scenarios Probable Cause Corrective Action Device is not properly grounded. Ensure the user is grounded or connect the ground lead. Display shows "Go.Over" Target charge exceeds 22 kV limit. Move the meter back immediately to prevent sensor damage. Device will not zero out Zeroed while facing a charged surface. Aim away from all objects and press ZERO again. No display/No LED lights Dead or incorrectly installed battery. Replace with a fresh 9V battery checking polarity.
The Simco FMX002 manual top model represents a tool or device designed for specific tasks, offering manual control and potentially a robust construction for durability. Its exact application and features would be detailed in the product manual or manufacturer's specifications, which are essential resources for anyone using or considering the purchase of this device.