Qidi X-pro Manual 2021 〈Edge〉

The QIDI X-Pro uses a manual leveling system assisted by the touchscreen interface. Proper leveling is the single most important factor for print quality. Select "Leveling" on the touchscreen. The print head will move to the first of three points.

Use a standard piece of A4 paper. Slide it between the nozzle and the build plate.

Insert the two spool holders into the slots on the rear panel of the printer. Place the magnetic front acrylic door onto its hinges. qidi x-pro manual

Configure print settings (speed, temperature, layer height) and click "Slice". Save: Save the generated G-code file to the USB drive.

If filament stops extruding, heat the nozzle to 240°C. Use the included unclogging pin to push through the top of the extruder drive down through the nozzle tip to clear debris. The QIDI X-Pro uses a manual leveling system

The secondary nozzle knocks down printed parts or drops strings of plastic on the model.

Plug the power cord into the lower-left corner at the back and use the primary power switch to start the machine. Calibration and Bed Leveling The print head will move to the first of three points

Tap on the screen to move to the second and third points, repeating the friction test at each location.