For those drafting repair or mod plans, these are the most documented connection points on the JDM-040 PCB : : Pins 11 & 12 : USB Power (+5V) .
Before opening a schematic document, verify the board revision. The outer plastic shell of a V2 controller features grey buttons and a distinctive light strip shining through the top edge of the touchpad. To confirm the internal motherboard version: Open the controller shell. Remove the plastic battery tray.
are thinner than older models, making it susceptible to "pad lifting" if a technician applies too much heat during a joystick replacement. Fuse Protection: jdm-040 schematic
┌────────────────────────────────────────────────────────┐ │ JDM-040 MOTHERBOARD │ │ │ │ [Left Stick] [Touchpad Conn.] [Right Stick]│ │ (10-Pin FPC) │ │ │ │ [D-Pad Vias] [Action Vias]│ │ (Up, Dn, L, R) (X, O, △, □) │ │ │ │ [Main Microcontroller] [Charging Conn.] │ │ (ARM Cortex) (12-Pin JDS-040) │ └────────────────────────────────────────────────────────┘ Go to product viewer dialog for this item. motherboard (Sony part number 1-981-330-31 Go to product viewer dialog for this item.
Processes input data, manages Bluetooth, and controls audio/haptics. Input Interface 18-20 pin conductive film connector For those drafting repair or mod plans, these
The JDM-040 schematic finds applications in various industries, including:
A separate board containing the micro-USB charging port and light bar LED. Conductive Film: A flexible membrane used to register button presses. Analog Modules: Standard 3-pin potentiometer-based sticks. 2. Common Points of Interest in the Schematic To confirm the internal motherboard version: Open the
Unlike the unified chip in the JDM-001, the JDM-040 uses a two-chip solution. The main processor is typically a chip labeled CXD90063GG . This manages Bluetooth 5.1, USB communication, and haptic feedback logic. The schematic shows that this chip operates on multiple power rails: 3.3V for I/O, 1.8V for core logic, and a 5V input from USB.