Kirisun Pt8100 Programming Software Better Guide

Available in VHF (136–174 MHz) or UHF (400–470 MHz, 450–520 MHz) variants.

The Kirisun PT8100 requires its specific dedicated software version to avoid read/write errors. Step 1: Install the USB Cable Driver

Go to "Setup" or "Communication" and select the correct COM port identified in Device Manager. kirisun pt8100 programming software

: In the software, select the correct COM port and click Read to download the current "codeplug" (settings) from the radio. Modify Settings : Channels : Enter frequencies for up to 256 channels. Signaling : Configure CTCSS, DCS, or 5-Tone signaling.

Navigate to "Optional Features" to set up: Emergency Call: Configure ENI and emergency alarms. Available in VHF (136–174 MHz) or UHF (400–470

: Download the PT8100 CPS (e.g., version V1.28) from an authorized distributor or the Kirisun Download Center file to install it on your computer. Connection Plug the USB end of the programming cable into your PC.

Kirisun PT8100 is a professional mobile analog radio designed for vehicle or base station use. Programming the unit requires specific Customer Programming Software (CPS), a compatible cable, and a Windows-based PC. Programming Software & Tools : In the software, select the correct COM

Launch the Kirisun PT8100 programming software. Navigate to the top menu bar, click on (or Communication ), and select Port . Choose the COM port number that matched your cable in the Device Manager. Step 3: Read Data from the Radio

Recheck Device Manager for the correct port number and secure the RJ45 connection. Software configuration doesn't match hardware capability.

Check the COM port settings, ensure the cable is plugged firmly into the microphone jack, and confirm the radio is powered on.