Help you for a specific sub-model. Explain the wiring configuration in more detail. Discuss best practices for cascading multiple switches. Let me know how you'd like to proceed. Share public link
: Rated IP65/67 and IP69K , allowing it to withstand high-pressure washdowns. Operating Temperature : Ranges from -20°C to +55°C. Power Supply : 24 V DC ±20%. Installation and Mounting Guide
| Pin | Wire Color | Signal | Role / Description | | :--- | :--- | :--- | :--- | | 2 | | +24V | Power supply (24 V DC) | | 7 | Blue | 0V | Power supply ground | | 5 | Black | OSSD1 | Safety Output 1 | | 6 | White | OSSD2 | Safety Output 2 | | 8 | Red/Black | Safety Input 1 | External safety input channel 1 | | 4 | Red/White | Safety Input 2 | External safety input channel 2 | | 1 | Grey | AUX Output | Auxiliary output (non-safety) | | 3 | Aqua | Not used | This wire should be insulated individually |
For engineers who need the raw data to validate their measurement system: keyence gs-11pc manual
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Utilizes unique RFID coding to prevent intentional bypassing or tampering by operators.
0;ad9; Use the standard M12 connector. If indicators flash red/green, check for incorrect wiring (specifically the red/black and red/white wires). Help you for a specific sub-model
If External Device Monitoring (EDM) is not utilized, ensure the proper looping or jumper status as outlined by your specific controller manual to prevent fault codes. Mechanical Installation and Alignment
The final switch in the chain routes directly into your safety relay or safety PLC.
): 10 mm (The distance at which the switch is guaranteed to turn ON). Assured Releasing Distance ( Sarcap S sub a r end-sub Let me know how you'd like to proceed
Error state (lock failure, wiring fault, or internal malfunction). 4. Cascading (Series Connection)
Front: 18 mm (0.71"), Side: 14 mm (0.55"). Installation Steps
PLe, Category 4 (EN ISO 13849-1) and SIL3 (IEC 61508). Cascading: Supports serial connection for up to 30 units . Power Supply: 24 V DC ±20%. 2. Wiring & Pinout (M12 Connector)
The GS-11PC features a built-in cable with flying leads. Proper wiring is essential to ensure that the safety functions operate correctly and to prevent damage to the internal circuitry. Wiring Color Code Table Wire Color Signal Name Description Main power supply input Blue Power supply ground Black Safety output 1 (Connects to safety relay/PLC) White Safety output 2 (Connects to safety relay/PLC) Gray Interlock / Reset Input for manual reset or feedback loop monitoring Pink EDM / Aux Input External Device Monitoring input Red Safety Input 1 Input for cascading (Connect to previous OSSD 1) Yellow Safety Input 2 Input for cascading (Connect to previous OSSD 2) Aqua AUX Output Non-safety status output to standard PLC Standard Standalone Connection For a single, standalone installation without cascading: Connect Brown to +24 VDC. Connect Blue to 0 VDC.