Hyt Tc-320 Programming Software 【VALIDATED ◆】

Select 12.5 kHz (Narrowband) or 25 kHz (Wideband) to comply with your local telecommunications regulations (e.g., FCC regulations in the US). 2. Optional Features & Function Keys

Always ensure you have the proper licensing (such as GMRS, business, or amateur radio licenses) required by your local government before transmitting on programmed frequencies.

Always backup your radio's original factory settings before making changes.

Customize the short-press and long-press actions of the side buttons (e.g., Monitor on/off, Battery indicator, Squelch adjustment).

Right-click the Windows Start menu and select . Expand the Ports (COM & LPT) section. hyt tc-320 programming software

Improper connection sequences can cause read/write errors or corrupt your radio's firmware. Follow this exact sequence: Turn the HYT TC-320 radio.

Input your licensed frequencies (UHF range typically 400–470 MHz, depending on your specific TC-320 sub-model).

Configuring CTCSS/CDCSS (Privacy Tones) to filter out unwanted chatter.

PC在连接到对讲机之前，需要先安装专用的驱动程序。当USB编程线（通常推荐或需要使用Hytera PC30型号）连接到电脑时，操作系统可能会发出提示。此时应手动将驱动程序路径指向包含该驱动的文件夹，并按照指引完成安装。 Select 12

Plug the mini-USB end of the cable firmly into the data port on the side of the TC-320.

Let me know your situation so I can provide the exact steps to get your radio working! Share public link

Using the HYT TC-320 programming software offers several benefits, including:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Always backup your radio's original factory settings before

| Parameter | Typical Value | Note | |-----------|---------------|------| | Frequency (RX/TX) | e.g., 462.5625 (FRS ch1) | Must match all radios in fleet | | Squelch Level | 3 | 0=open, 9=very tight | | CTCSS (RX/TX) | 67.0 Hz | To block interference | | Bandwidth | 25 kHz (wide) | For compatibility with older analog | | TX Power | High (2W) | Low saves battery but short range |

is the essential gateway to unlocking the full potential of your HYT TC-320 two-way radio. Whether you are a security team leader, event coordinator, construction site manager, or amateur radio enthusiast, properly programming your TC-320 is critical for clear, reliable, and organized communication. Without the correct software, your radio is little more than a paperweight—unable to access the correct frequencies, squelch settings, or privacy codes.

In this guide, we will cover what the software does, where to find it, how to set it up, and the common pitfalls to avoid during the programming process.