If a previously paired device fails to connect, open your phone's wireless menu and choose Forget Device . Reset the pairing memory by holding down the Pair button on the control deck, then scan and pair fresh.
If you experience audio degradation, interference, or power loss, use this matrix to diagnose and fix the issue. No Power / LED Off
Once fully charged, the indicator light may turn off or change color.
Toggle the power switch to "ON" to activate the unit. A voice prompt or LED light will signal that it is ready. Bluetooth Pairing Turn on the speaker. Press the MODE button to select "Bluetooth" mode.
Portable Mini Boom Box with Bluetooth® Technology | Jaycar Australia
Front-panel physical buttons and remote control compatibility. Unboxing and Initial Hardware Setup
Toggles the unit between active operation and standby mode.
Connect a 3.5mm audio cable from your device's headphone jack to the speaker's "Aux In" port. Technical Specifications Specification Power Output Frequency Response 100Hz – 20kHz Battery 3.7V 1500mAh Lithium-ion Run Time 2 to 5 hours (depending on volume) Dimensions 250(L) x 138(Dia) mm Weight Safety and Maintenance
Do not expose the speaker to extreme moisture or rain, as it is not fully waterproof. Avoid exposing the unit to extreme temperatures.
Use the provided 3.5mm jack to connect non-Bluetooth devices. 5. Troubleshooting the CS2469 If you are facing issues, try these common solutions: Speaker will not turn on
Press the dedicated number button (1, 2, 3, or 4) on the IR remote for instant switching. Audio Optimization Tips
If audio becomes distorted or the unit powers off, recharge it immediately using the USB cable.
The DigiTech CS2469 supports direct playback of MP3 files from external media.
If a previously paired device fails to connect, open your phone's wireless menu and choose Forget Device . Reset the pairing memory by holding down the Pair button on the control deck, then scan and pair fresh.
If you experience audio degradation, interference, or power loss, use this matrix to diagnose and fix the issue. No Power / LED Off
Once fully charged, the indicator light may turn off or change color.
Toggle the power switch to "ON" to activate the unit. A voice prompt or LED light will signal that it is ready. Bluetooth Pairing Turn on the speaker. Press the MODE button to select "Bluetooth" mode. digitech cs2469 manual
Portable Mini Boom Box with Bluetooth® Technology | Jaycar Australia
Front-panel physical buttons and remote control compatibility. Unboxing and Initial Hardware Setup
Toggles the unit between active operation and standby mode. If a previously paired device fails to connect,
Connect a 3.5mm audio cable from your device's headphone jack to the speaker's "Aux In" port. Technical Specifications Specification Power Output Frequency Response 100Hz – 20kHz Battery 3.7V 1500mAh Lithium-ion Run Time 2 to 5 hours (depending on volume) Dimensions 250(L) x 138(Dia) mm Weight Safety and Maintenance
Do not expose the speaker to extreme moisture or rain, as it is not fully waterproof. Avoid exposing the unit to extreme temperatures.
Use the provided 3.5mm jack to connect non-Bluetooth devices. 5. Troubleshooting the CS2469 If you are facing issues, try these common solutions: Speaker will not turn on No Power / LED Off Once fully charged,
Press the dedicated number button (1, 2, 3, or 4) on the IR remote for instant switching. Audio Optimization Tips
If audio becomes distorted or the unit powers off, recharge it immediately using the USB cable.
The DigiTech CS2469 supports direct playback of MP3 files from external media.
